General and Orthodontic Dentistry
403 Wolf River Dr, Fremont, WI 54940-0500

(920) 446-2213

Follow Us Online

  


Find Us

403 Wolf River Dr
Fremont, WI 54940

Map & Directions


Posts for category: Dental Procedures

NewFrontTeethforaTeenagedDavidDuchovny

In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?

“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.

How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.

With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.

In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.

While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.

Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”

AnchorageDevicesEnableGreaterPrecisionDuringOrthodonticTreatment

As a basic orthodontic appliance, braces are what allows us to move teeth into better positions to improve a person’s bite. In certain cases, though, this treatment application gets a little assistance from Temporary Anchorage Devices (TADs) to improve accuracy and reduce treatment time.

Braces take advantage of our teeth’s natural ability to move. Teeth are held in place within the bone by the periodontal ligament, an elastic tissue that attaches to the teeth with microscopic fibers secured by a hardened substance called cementum. The periodontal ligament is constantly remodeling in response to changes in the mouth. As pressure is placed on a tooth, new bone, ligament and cementum are formed on the “pulling” side of the tooth; on the other side, the bone and ligament dissolve (resorb), allowing the tooth to move in that direction.

Braces allow this natural process to occur with controlled forces applied by thin flexible wires threaded through the small brackets attached to the front of the teeth and then affixed or “anchored” to other teeth. By attaching the teeth to the other teeth by wires running through all the brackets, “anchorage” is created to allow teeth to be moved where the dentist wants them to go. By adjusting the tension on the wires, we can apply light but constant pressure on the “unanchored” teeth to move them into a new desired position.

Teeth we do not want to move are referred to as the anchorage for teeth we do want to move. If, however, the situation calls for more precise isolation of teeth to be moved, TADs can be very useful. TADs are mini-implants imbedded in the bone to serve as anchorage at strategic locations in the mouth. In this way, the group of teeth to be moved receives forces that are applied through the additional anchorage provided by the TADs. That “tension” or “pressure” is applied only to them and not to adjacent teeth that should not move. This increases efficiency for tooth movement and helps reduce the treatment time.

TADs can be placed using local anesthesia and with little discomfort, and are removed when orthodontic treatment is completed. Although the procedure is pretty straightforward, it does require collaboration between orthodontist and surgeon to ensure correct positioning.

In the end, TADs increase our ability to control the forces that move teeth during orthodontic treatment. This lessens discomfort for the patient and helps ensure the end result — a more functional bite and a transformed smile.

If you would like more information on the use of TADs and other orthodontic appliances, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “What are TADs?

TakingtheDreadOutofDentalVisits

We always look forward to seeing our patients, but not all of you look forward to seeing us! If you’re one of them, don’t worry — we don’t take it personally. Dental anxiety prevents many people from seeking the care they require to restore or maintain a healthy smile.

But if dental problems are allowed to progress, they can affect not only the beauty of your smile and health of your mouth, but your overall wellness, too. Infection can travel from the mouth to other areas of the body, and dental disease exacerbates chronic health conditions like heart disease or diabetes.

Overcoming Apprehension

Fear should never be an obstacle (in the immortal words of President Franklin Roosevelt, “…the only thing we have to fear is fear itself…”). And fortunately there are some safe options for those of us who can’t get past our anxiety when it comes to dental care:

Oral Sedation. A sedative medication can be prescribed that you take by mouth approximately an hour before your dental visit to minimize anxiety and promote relaxation.

Intravenous (IV; “intra” – inside, “venous” – vein) Sedation. If oral sedation isn’t entirely effective in facilitating treatment, then a medication combining a sedative for relaxation and a pain-blocking anesthetic can be delivered through or small needle or catheter that is gently inserted into a vein. This is referred to as “conscious sedation” because you are in a semi-awake state during which you are able to respond to verbal direction. It takes effect quickly, and you can come out of it quickly. However, you may not remember much about your procedure. It is very different from general anesthesia during which you are completely unconscious.

Safety First

Dentists who offer IV sedation receive extensive training after which we must pass an exam and apply for a special permit that we maintain through continuing education. We carefully screen patients for eligibility and monitor you throughout so you can rest easy before, during, and after your procedure.

If you would like more information about sedation in dental care, please contact us or schedule an appointment for a consultation. You can also learn more about the subject by reading the Dear Doctor magazine article “Oral Sedation Dentistry.”

3QuestionsYouShouldAskbeforeUndergoingTeethWhitening

There are a number of teeth whitening options to put the brightness back into your smile — from professional dentist office applications to over-the-counter products for home use. But before you decide on an option, you should first consider whether whitening is right for you and to what extent.

Here are 3 questions to ask yourself — and us — before undergoing a whitening treatment.

Do I have any dental problems that make whitening problematic? The underlying cause of the staining may stem from decay, root canal problems or other dental issues; in these cases the underlying cause needs to be treated first, because whitening would only mask the actual problem. You also may not want to whiten your teeth for aesthetic reasons: people with certain features like short teeth or gummy smiles may find these features become more prominent after teeth whitening. It might be more advisable in these cases to consider other cosmetic options first.

How much whitening do I really need to improve my smile? One of the biggest myths about teeth whitening is the brighter the shade the more attractive the smile. A truly attractive tooth color, however, is more nuanced, and every person’s ideal color is different. The most attractive and natural color is one that matches the whites of your eyes.

What effect will whitening have on existing dental work I already have? In most cases, none — and that could be a problem. Composite resins or ceramic dental material have their color “baked in” and bleaching chemicals used in whitening have no effect on them. The concern then is whether whitening nearby natural teeth may produce a color mismatch between them and the dental restorations, resulting in an unattractive appearance.

Before you decide on teeth whitening, visit us first for a complete exam and consultation. We’ll discuss whether whitening is a good option for you, or whether there are other issues we should address first. We can also advise you on products and techniques, and how to get the most from your whitening experience.

If you would like more information on teeth whitening, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Important Teeth Whitening Questions…Answered!

By Scharine
June 02, 2015
Category: Dental Procedures
Tags: celebrity smiles   bonding  
ARoyalFix

So you’re tearing up the dance floor at a friend’s wedding, when all of a sudden one of your pals lands an accidental blow to your face — chipping out part of your front tooth, which lands right on the floorboards! Meanwhile, your wife (who is nine months pregnant) is expecting you home in one piece, and you may have to pose for a picture with the baby at any moment. What will you do now?

Take a tip from Prince William of England. According to the British tabloid The Daily Mail, the future king found himself in just this situation in 2013. His solution: Pay a late-night visit to a discreet dentist and get it fixed up — then stay calm and carry on!

Actually, dental emergencies of this type are fairly common. While nobody at the palace is saying exactly what was done for the damaged tooth, there are several ways to remedy this dental dilemma.

If the broken part is relatively small, chances are the tooth can be repaired by bonding with composite resin. In this process, tooth-colored material is used to replace the damaged, chipped or discolored region. Composite resin is a super-strong mixture of plastic and glass components that not only looks quite natural, but bonds tightly to the natural tooth structure. Best of all, the bonding procedure can usually be accomplished in just one visit to the dental office — there’s no lab work involved. And while it won’t last forever, a bonded tooth should hold up well for at least several years with only routine dental care.

If a larger piece of the tooth is broken off and recovered, it is sometimes possible to reattach it via bonding. However, for more serious damage — like a severely fractured or broken tooth — a crown (cap) may be required. In this restoration process, the entire visible portion of the tooth may be capped with a sturdy covering made of porcelain, gold, or porcelain fused to a gold metal alloy.

A crown restoration is more involved than bonding. It begins with making a 3-D model of the damaged tooth and its neighbors. From this model, a tooth replica will be fabricated by a skilled technician; it will match the existing teeth closely and fit into the bite perfectly. Next, the damaged tooth will be prepared, and the crown will be securely attached to it. Crown restorations are strong, lifelike and permanent.

Was the future king “crowned” — or was his tooth bonded? We may never know for sure. But it’s good to know that even if we’ll never be royals, we still have several options for fixing a damaged tooth. If you would like more information, please contact us or schedule an appointment for a consultation. You can learn more by reading the Dear Doctor magazine articles “Repairing Chipped Teeth” and “Crowns and Bridgework.”